Set up flat-rate or per-m² charges
Set up flat-rate or per-m² charges

👉 Where | Lease page › Finance tab › Fixed rents & charges › + button |
👤 Who | All profiles, except the Observer. |
✅ Prerequisites | The lease and its units created, with their areas for a charge per m². For a charge as a %, the reference cost (the rent, for example) already created. |
⏱️ In practice | When the lease is recorded, then at each amendment or change to the articles of the EIG. |
In this article
- 1- Identifying how the charge is calculated
- 2- A service charge flat fee
- 3- A charge per m², with or without weighting
- 4- A charge as a % of the rent or of another cost
- 5- A charge per unit
- 6- Making the charge change over time
- 7- Limits and points to watch
- 8- Case study: the MERCATOSUD charges
- 9- What the rules say
1- Identifying how the charge is calculated
A charge is more than a figure. Before you enter it, note down from the lease (or from the articles of the EIG or of the traders' association):
- its calculation method: flat fee, €/m², % of another cost;
- its basis: the area used and its weighting, or the reference cost;
- its amount or rate, and the periodicity in which it is expressed;
- when it takes effect and when it ends;
- how it changes over time, if at all.
The Amount type of the form reflects the calculation method:
The lease says… | Amount type | Example |
|---|---|---|
"a flat fee of €X per year" | Amount | common charges flat fee |
"€X per m²" | Amount/Surface | marketing fund, EIG contribution |
"€X per unit" | Amount/Unit | a fee per pitch |
"X% of the rent" or of another charge | % of a fixed cost | technical management fees |
"X% of turnover" | none: it is a variable charge | see section 7 |
2- A service charge flat fee
A flat fee is an amount set in advance, which depends neither on an area, nor on a percentage, nor on an index.
- Click + in Fixed rents & charges.
- Type of cost: the charge from the chart of accounts, for example Charges communes on the demo brand.
- Amount type: Amount.
- Periodicity, then the Contractual amount expressed in that periodicity: the annual amount for Annual, the monthly amount for Monthly.
- Units concerned, Label (for example "Service charge flat fee"), Start date, End date.
- Comment (what the flat fee covers, the exclusions) and Lease Reference (the lease page), then Save.
The full step by step, with a GIF, is in Create a rent or a fixed charge.
⚠️ A flat fee is not a provision: it is final, whereas a provision is reconciled every year against the actual expenses. For provisions, see Track actual charges: provisions and reconciliation.
3- A charge per m², with or without weighting
The amount is expressed in €/m² and multiplied by the area used in the lease. This is the usual case for the marketing fund or the EIG contribution of a shopping centre.

- Click +, choose the Type of cost (for example GIE / Fonds Marketing), then the Amount type Amount/Surface.
- Contractual amount: the price per m², in the chosen periodicity (12 for €12/m²/year).
- Click Add the surfaces and areas concerned.
- Units & Surfaces: choose the unit and the area used for the calculation (Contractual area, for example). The list shows the areas filled in on each unit.
- Weighting type: see the table below. Fill in the Weighting if needed.
- The ⊕ button adds another unit or another area; the bin removes the row.
- Complete the Label, dates, Comment and Lease Reference, then Save.
Weighting type | What you fill in | Calculation |
|---|---|---|
No weighting (default) | nothing | price × area |
Percentage | the share of the area used, in % | price × area × % |
Value | the weighted area, calculated according to the lease or the articles | price × weighted area |
Choosing the area and its weighting. The lease does not necessarily use the gross area of the premises. It may refer to the usable area, the gross leasable area (GLA), a weighted area, and include or exclude ancillary areas:
- a storeroom is often excluded from the calculation of a marketing fund or EIG contribution, but included with a weighting for other charges;
- a mezzanine may count at 100%, be weighted or be excluded;
- an EIG often calculates the weighted area in brackets that add up: the method is in Calculer la surface pondérée d'un GIE ou d'une association de commerçants (in French). Then enter the result with the Value weighting, and the details of the calculation in Comment.
ℹ️ If the lease or the articles say nothing about weighting, the whole area is used: choose No weighting.
4- A charge as a % of the rent or of another cost
Some charges are expressed as a percentage of another cost of the lease: technical management fees as a % of the rent, management fees as a % of the charges.

- Click +, choose the Type of cost, then the Amount type % of a fixed cost. The Linked costs block appears.
- Fixed costs: the reference cost or costs (the rent, a provision…). You can choose more than one.
- Variable costs: a variable rent or charge to add to the basis, if the lease provides for it.
- Percentage: the rate in the lease.
- Units concerned, Label, dates, Comment, Lease Reference, then Save.
The amount of the charge follows that of the linked costs: when the rent is reviewed, so is the charge.
5- A charge per unit
The Amount/Unit type multiplies the contractual amount by a number of units, attached through the Linked units field. It suits fees expressed per item: a pitch, a parking space, a piece of equipment.
6- Making the charge change over time
A charge can change over time just like a rent. Open it (Consult icon on its card), then set up how it changes in the Rent review mechanism:
The lease provides for… | What you do | Article |
|---|---|---|
indexation on an index (ICC, ILC…) | Adjustment tab, Create a new indexation | |
a fixed increase (2% per year, for example) | Adjustment tab, Create a new variation | |
the same change as the rent | Enable revision tracking for an existing cost |
⚠️ Tracking the revisions of a cost takes over its whole evolution: indexation, update and advanced options. If the marketing fund is indexed like the rent but without its update, do not track the rent: set up the indexation of the marketing fund itself.
7- Limits and points to watch
- A charge as a % of turnover or of another financial figure of the site is created in Variable rents & charges, like a variable rent: see Create a variable rent.
- A charge per m² depends on the areas of the units: if an area changes (amendment, extension), update the unit. See Décrire les lots et leurs surfaces (in French).
- All amounts are excluding VAT: Leasup does not add VAT.
- The calculated amounts should match the invoiced amounts: a gap shows in Details of calculations per year. See Lease costs: overview.
8- Case study: the MERCATOSUD charges
The MERCATOSUD lease (unit Z152, contractual area 5,531 m², rent of €829,650 excl. VAT per year) provides for two charges:
- a contribution to the marketing fund of €12 excl. VAT per m² per year, calculated on 80% of the contractual area, storerooms being excluded (lease art. 9, page 15);
- technical management fees of 2% of the rent.
Step | What you do | Result |
|---|---|---|
1 | + › GIE / Fonds Marketing, Amount/Surface, Annual, €12 | — |
2 | Add the surfaces and areas concerned › Contractual area - 5531m², Percentage, 80 | €12 × 5,531 m² × 80% = €53,097.60 excl. VAT per year |
3 | Label "Marketing fund", Lease effective date, Lease end date › Save | The marketing fund card, in the category of its type of cost. |
4 | + › Charges communes, % of a fixed cost, Fixed costs: the rent, Percentage 2 | 2% × €829,650 = €16,593 excl. VAT per year |
5 | Units concerned Z152, Label "Technical management fees" › Save | The fees follow the reviews of the rent. |
9- What the rules say
🔎 Understanding
- The inventory of charges. The lease includes a precise and exhaustive inventory of the categories of charges, taxes, levies and fees, with how they are split between landlord and tenant (article L145-40-2 of the French Commercial Code).
- What cannot be passed on. Some expenses cannot be charged to the tenant, in particular the major repairs of Art. 606 of the French Civil Code and the landlord's fees for managing the rent (article R145-35 of the French Commercial Code). These rules apply to leases signed or renewed since 5 November 2014.
- Splitting between tenants. In a multi-let property, the lease specifies how the charges are split between the tenants; this split depends on the area occupied (article L145-40-2 of the French Commercial Code). Hence the importance of the area and of the weighting used.
- The EIG or the traders' association. The contribution is governed by its articles, annexed to the lease; check that you have their latest version.
Going further
- 📘 Create a rent or a fixed charge — the form step by step
- 📘 Track actual charges: provisions and reconciliation — when the charge is reconciled
- 📘 Plafonner des charges (in French) — limiting the charges that can be passed on
- 📘 Calculer la surface pondérée d'un GIE ou d'une association de commerçants (in French) — the calculation in brackets
- 📘 Index a rent or a charge — making the charge change over time
Updated on: 20/11/2026
Thank you!
