Create a rent or a fixed charge
Create a rent or a fixed charge

👉 Where | Lease page › Finance tab › Fixed rents & charges › + button |
👤 Who | All profiles, except the Observer. |
✅ Prerequisites | The lease and its units created. The lease to hand: amount, periodicity, effective date, clause on how the amount changes. |
⏱️ In practice | When the lease is recorded, then at each amendment that adds a cost. |
In this article
- 1- Before you start: reading the lease
- 2- Creating the cost
- 3- The fields of the form
- 4- Choosing the start and end dates
- 5- Updating the amount when the lease takes effect
- 6- Editing or deleting a cost
- 7- Limits and points to watch
- 8- Case study: the MERCATOSUD rent
- 9- What the rules say
1- Before you start: reading the lease
A cost is more than an amount. Before you enter it, note down from the lease:
What to note down | Where it goes in Leasup |
|---|---|
The nature of the cost: rent, charge, tax | Type of cost |
How it is calculated: flat amount, €/m², per unit, % of another cost | Amount type |
The amount or the rate, and its period (per year, per month…) | Contractual amount, Periodicity |
The premises concerned | Units concerned |
When it takes effect and when it ends | Start date, End date |
How it changes: index, fixed %, update | the Rent review mechanism, after creation |
The article and page of the lease | Lease Reference |
⚠️ The effective date of a rent is not always that of the lease: a lease may take effect on 1 June while its rent only starts when the shop opens.
2- Creating the cost
- Open the lease, Finance tab, Fixed rents & charges sub-tab.
- Click the +, on the right.
- Choose the Type of cost: the Label fills in with its name.
- Choose the Amount type and the Periodicity.
- Fill in the Contractual amount and the Units concerned.
- Adjust the Label: "Base rent", "Service charge flat fee"…
- Choose the Start date and the End date.
- Fill in the Lease Reference: the article and page of the lease.
- Click Save.

→ The cost appears as a card in its category (Rents, Charges, Taxes…), and its amounts in Details of calculations per year.
3- The fields of the form
Field | Options | What you need to know |
|---|---|---|
Type of cost | The sub-categories of your brand's chart of accounts shown as named in your brand (e.g. on the demo brand: Loyer Fixe (LMG), Charges communes, Taxe foncière & TOM, GIE / Fonds Marketing) | The type classifies the cost (rent, charge, tax) and links it to its accounting code. Add, at the bottom of the list, creates a new one. |
Amount type * | Amount · Amount/Surface · Amount/Unit · % of a fixed cost | See the table below. |
Periodicity * | Annual (default) · Biannual · Quarterly · Monthly | The period of the amount entered, not the billing period. |
Contractual amount * | in € | The amount in the lease, for the chosen periodicity: an annual amount for an annual cost. |
Units concerned | the units of the lease | The premises the cost relates to. |
Label * | text | Pre-filled with the type of cost. |
Start date * | see section 4 | |
End date * | see section 4 | |
Comment | text | The nature of the cost, its exclusions, where the amount comes from. |
Lease Reference | text | The article and page of the lease, to find the clause again. |
Amount type | The amount entered is… | Example |
|---|---|---|
Amount | A fixed amount for the period. | Rent of €120,000 per year. |
Amount/Surface | A price per m², multiplied by the area of one or more units, with optional weighting. | Marketing fund at €18/m²/year. |
Amount/Unit | A unit price, multiplied by the units of a lettable unit. | 40 parking spaces at €600 per year. |
% of a fixed cost | A percentage of another cost of the lease. | Management fees at 3% of the rent. |
📘 Charges per m², flat-rate or as a % are covered in detail in Set up flat-rate or per-m² charges.
ℹ️ The periodicity of the cost and the invoicing period of the lease are independent: an annual rent can be invoiced every quarter. Leasup splits the amount according to the Invoicing period in Payment Modalities.
4- Choosing the start and end dates
Start date | The cost starts… |
|---|---|
Lease effective date | when the lease takes effect. |
Initial effective date of the contract | when the very first lease took effect, for a renewed lease. |
Commencement date | on entry into possession, for the purchase of a business or of a leasehold right. |
Specific date | on the date you fill in. |
End date | The cost stops… |
|---|---|
No end date | never: it runs as long as the lease is active. |
Lease end date | at the end of the lease. |
Specific date | on the date you fill in: a flat fee limited in time, a rent replaced by another one. |
📅 The lease dates are entered in the Dates & deadlines tab: see Renseigner les dates et la durée du bail (in French).
5- Updating the amount when the lease takes effect
Some leases set a rent, then provide for it to be updated when the lease takes effect: the starting amount is not the one written in the lease. The update happens only once; indexation, on the other hand, recurs throughout the lease.
- Open the cost with the Consult icon.
- In the Rent review mechanism, click the Update tab.
- Choose the method:
Method | When to use it | What you fill in |
|---|---|---|
Enter an amount | The updated amount is known. | Manually updated amount. |
By index | The lease updates the amount according to an index. | Update date (cost effective date or specific date), Index, Reference index, Comparison index. |
By variation | The lease provides for a percentage or an amount. | Update date, Variation type, Increase value. |
- Click Save.
→ The cost page shows the Updated amount, and indexation starts from this amount.
⚠️ The updated amount is expressed in the same amount type as the cost: in €/m² for a cost per m².
6- Editing or deleting a cost
Open the cost with the Consult icon: at the top of its page, the pencil edits it, the bin deletes it.
You want to… | Do this |
|---|---|
Correct a mistake | The pencil, then Save. |
Change the rent during the lease, after an amendment | Do not change the contractual amount: see Reporter un avenant dans le contrat (in French). |
Stop a cost | Fill in its end date. |
Remove a cost created by mistake | The bin. |
7- Limits and points to watch
- ⚠️ Changing the contractual amount recalculates the whole history of the cost from its start date. For a new amount from a given date, add a review.
- Amounts are excluding VAT: Leasup does not add VAT.
- A variable cost, calculated on turnover or another financial figure, is created in Variable rents & charges: see Create a variable rent.
- A one-off cost (key money, fees) is created in Fees & Other Costs: see Record fees and other costs.
8- Case study: the MERCATOSUD rent
The MERCATOSUD lease takes effect on 1 January 2008. It sets a rent of €829,650 excl. VAT and charges per year for unit Z152, payable quarterly, indexed every 3 years on the ICC (construction cost index).
Step | What you do | What Leasup shows |
|---|---|---|
1 | Finance › Fixed rents & charges › + | The form. |
2 | Type of cost Loyer Fixe (LMG), Amount, Annual, €829,650 | — |
3 | Units concerned Z152, Label "Base rent" | — |
4 | Lease effective date, No end date, Lease Reference "Lease art. 7, page 12" › Save | The Base rent card: €829,650 / year, next quarter €207,412.50. |
5 | Consult › Rent review mechanism › three-yearly ICC indexation | The Adjusted amount follows the indices: see Index a rent or a charge. |
9- What the rules say
🔎 Understanding
- The initial rent. The rent of a French commercial lease is freely set by the parties when it is signed. The rules that regulate it (three-yearly review, cap on renewal) only apply afterwards (articles L145-33 et seq. of the French Commercial Code).
- VAT. Letting bare premises is exempt from VAT (article 261 D, 2° of the French General Tax Code), unless the landlord opts for VAT (article 260, 2°). Leasup records amounts excluding VAT; the lease states whether it is subject to VAT in Payment Modalities.
- Charges and taxes passed on. The lease must include an inventory of the categories of charges, taxes, levies and fees, with how they are split between landlord and tenant (article L145-40-2 of the French Commercial Code).
Going further
- 📘 Lease costs: overview — reading the Finance tab
- 📘 Index a rent or a charge — making the cost change over time
- 📘 Set up flat-rate or per-m² charges — charges in detail
- 📘 Décrire les lots et leurs surfaces (in French) — the units to attach a cost to
Updated on: 20/11/2026
Thank you!
