Articles on: Indexation
This article is also available in:

Index a rent or a charge

Index a rent or a charge


Index a rent or a charge


🎯 GOAL: reproduce the lease's indexation clause in Leasup (index, dates, reference and comparison quarters) so that the rent or the charge changes on its own as INSEE (the French national statistics institute) publishes the indices, and check each indexed amount before paying.




👉 Where

Lease page › Finance › Fixed rents & charges › cost card › Consult › Rent review mechanism › Adjustment tab

👤 Who

Every profile except Observer.

✅ Prerequisites

The rent or the charge created, with its start date. The indexation clause of the lease or the amendment to hand.

⏱️ In practice

When the lease or the amendment is entered; then at each indexation, to check the amount invoiced.


In this article



1- Reading the indexation clause


Indexation changes an amount according to an index published by INSEE, on dates set by the lease. It is entered on a fixed cost: the rent, a flat-rate charge, a tax. A guarantee, a reduction or a cap can then follow this indexation: see Index an item linked to a cost.


Before opening Leasup, note down from the clause:


In the lease

Example

In Leasup

The frequency

"every year", "every three years"

Periodicity

The date

"on the anniversary date", "on 1 January"

Adjustment date

The index

ILC, ILAT, ICC…

Index

The starting index

"the index for the 2nd quarter of 2025", "the latest index published on the effective date"

Reference index

The end index

"the index for the same quarter of the following year", "the latest published index"

Comparison index


⚠️ The date that counts is the start date of the cost, not necessarily that of the lease. A rent can come into force several months after the lease takes effect: its own date is the starting point.


⭐ LEASUP TIP: the lease changes by a fixed percentage ("+2% a year") rather than by an index? That is not an indexation but a variation: see Change a cost with a variation.


2- Adding the indexation


Adding an annual indexation on the ILC


  1. On the cost card, click Consult.
  2. Below the cost details, in the Rent review mechanism, stay on the Adjustment tab and click Create a new indexation.
  3. Frequency: Recurring for an indexation that comes back, Unique for a one-off revision.
  4. Periodicity: Annual, Triennial, Quarterly or Monthly.
  5. Adjustment date, then End date (see section 3).
  6. Indexes configuration: the Index, the Reference index, the Comparison index (see section 4).
  7. Comment: the clause and the page of the lease. Then Save.


→ The cost details show the Adjusted amount, and the indexation sums up its dates: 1st adjustment date, Next adjustment date, Last adjustment date.


3- The fields of the form


Field

Options

Good to know

Frequency

Recurring (default), Unique

Unique: a single revision, on the date chosen; no periodicity, no end date. This is how you enter a statutory triennial rent review, once it has taken place.

Periodicity

Triennial, Annual, Quarterly, Monthly

The rhythm set by the lease.

Adjustment date

Cost start date (default), 1st day of the period, Specific date

Anniversary: rent starting on 1 April, indexed every 1 April. 1st day of the period: 1 January for an annual indexation, the 1st day of the quarter for a quarterly one. Specific date: you fill in the 1st adjustment date.

End date

No end date, Cost end date, Specific end date

How long the indexation applies.

Index

ICC, ILC, ILAT, IRL, IPCS, BT01, TP01, FFB, Syntec, IPC…

The list of indices tracked by Leasup.

Reference index

the publications of the index: quarter, value, publication date

The starting index.

Comparison index

Latest published index as of revision date, Same quarter next year, a specific quarter (Q1.Y to Q4.Y-2)

The end index, recalculated at each revision.

Do not apply Article L112-1

switch, off by default

See section 5.


⚠️ Always check the 1st adjustment date calculated by Leasup against the lease. A lease taking effect on 14 April 2020, indexed on 1 January, may provide for a first indexation on 1 January 2022 only. 1st day of the period would give 1 January 2021: choose Specific date and enter 1 January 2022.


4- Choosing the reference index and the comparison index


The reference index is the starting point. Each publication is shown with its value and its publication date, for example "Q2 2025 • 136.81 • 24/09/2025". The lease says "the latest index published on the effective date"? Pick the one whose publication date comes before that date, not just the quarter that looks right.


The comparison index is the end point of each revision:


The lease provides for…

Choose

the latest index known on the indexation date

Latest published index as of revision date

the index for the same quarter, one year (or three years) later

Same quarter next year

a fixed quarter, for example "the index for the 2nd quarter of the previous year"

Q2.Y-1


At each following revision, the comparison index of the previous revision becomes the starting index. The cost details show the First indexation comparison index and the Last indexation comparison index.


💡 TIP: the lease only states the starting index, or only the end index? An indexation on 1 January or on a fixed date generally uses the latest published index; an indexation on the anniversary date, the same quarter. Have this choice approved by your legal team.


5- Article L112-1: the orange triangle


Article L112-1 of the French Monetary and Financial Code prohibits an indexation from taking into account an index variation over a period longer than the period between two revisions. Example: a triennial indexation comparing Q2 2013 with Q3 2016 covers 3 years and 3 months for a revision every 3 years.


By default, Leasup corrects this gap: it picks a comparison index that brings the index variation period back to the indexation period, at most. This is not necessarily the same quarter as the reference index: it all depends on the publication dates of the indices, which vary. In the Evolution panel, the revision concerned shows:

  • an orange triangle below the date; on hover, it reads art. L112-1;
  • the amount calculated without correction, struck through;
  • below it, the adjusted amount used.


The Do not apply Article L112-1 switch turns this correction off. Only turn it on after advice from your legal team: the clause that creates this gap is deemed unwritten.


6- Checking the result: the Evolution panel


The Evolution panel of an indexed rent


On the cost card, the history icon (bar chart) opens the Evolution panel:


Tab

What you read there

Adjustment

Each indexation: Indexation date, Amount before revision, Calculation (the two indices and their quarters), Adjusted amount.

Update

The update of the starting amount, if there is one.

History

The amount year by year, with the reductions.


An upcoming revision appears as a forecast amount. The download icon, at the top right, exports the evolution to an Excel file.


Check: the indexation dates, the indices in Calculation, the adjusted amount, then the amount invoiced by the landlord.


💡 TIP: the public report Contrat - Dernières Révisions, in Data reporting, lists for all your leases the revised costs, their periodicity, their indices and their last revision.


7- Updating the amount before indexing


Updating and indexation are two different things:

  • updating sets the starting amount once only, generally when the lease takes effect;
  • indexation then changes this amount at each period.


The update is entered in the Update tab of the rent review mechanism: Enter an amount, By index or By variation. The details are in Create a rent or a fixed charge. The indexation then starts from the Updated amount.


8- Correcting an indexation


  1. On the indexation, click the pencil.
  2. Change the field concerned, then Save.
  3. Open the Evolution panel again and check the new result.


The bin deletes the indexation: the cost then stays at its starting amount.


If there is a gap with the invoice, compare in this order: the starting amount, the 1st adjustment date, the index, the reference and comparison quarters, the periodicity. You will know whether the gap comes from the invoice, from the set-up or from a specific provision of the lease.


9- Limits and common mistakes


  • ❌ Mixing up the lease start date and the cost start date. It is the date of the indexed amount that counts.
  • ❌ Accepting the 1st adjustment date without checking it. It follows the general rule, not the exceptions in the lease.
  • ❌ Choosing the reference index on its value alone. The publication date matters just as much.
  • ❌ Indexing "by feel". The lease names no index? Look in the amendments and renewal deeds before choosing.
  • An "upward only" clause cannot be set up as such: see Understand the triennial rent review and indexation.
  • For a freeze, a cap, a floor or a weighting of the indexation: see Limit the indexation: freeze, cap, floor, weighting.


10- Case study: the triennial indexation of MERCATOSUD


The MERCATOSUD lease sets a rent of €829,650 excl. VAT a year from 1 January 2008, indexed every three years on the ICC. The starting index is that of the 2nd quarter of 2007; the comparison index, the latest published on the indexation date.


Step

What you do

What Leasup shows

1

Rent › Consult › Create a new indexation: Recurring, Triennial, Cost start date, No end date

First indexation on 1 January 2011.

2

ICC, reference Q2 2007 • 1435, comparison Latest published index as of revision date, comment "Lease art. 4, page 6" › Save

The Adjusted amount appears on the cost details.

3

Evolution panel › Adjustment

2011: 829,650 × 1,517 / 1,435 = €877,058.57.

4

Row for 1 January 2017: orange triangle

The latest published index (Q3 2016) stretched the period to 3 years and 3 months: Leasup uses Q2 2016. 946,436.97 × 1,622 / 1,637 = €937,764.67, instead of the €949,905.89 struck through.

5

Row for 1 January 2026

Current rent: €1,206,027.80 excl. VAT. Next indexation: 1 January 2029.


11- What the rules say


🇫🇷 This section applies to leases governed by French law. If your contracts fall under another country's law, the applicable rules differ.


🔎 Understanding


  • The choice of index. The index must be directly related to the subject of the contract or to the activity of one of the parties (article L112-2 of the French Monetary and Financial Code). For commercial leases, in practice these are the ILC (commercial and craft activities) and the ILAT (office and service activities); the ICC still appears in older leases.
  • The variation period. A clause that takes into account an index variation period longer than the time between two revisions is deemed unwritten (article L112-1 of the French Monetary and Financial Code). This is what Leasup corrects by default.
  • The sliding-scale clause. If the clause makes the rent vary by more than a quarter compared with the rent set by contract or by court decision, either party can apply for its revision (article L145-39 of the French Commercial Code).
  • Statutory triennial rent review, "upward only" clause: see Understand the triennial rent review and indexation.


This section is for educational purposes. It is not a legal analysis: the exact terms depend on your lease, its amendments and, if needed, advice from your lawyer.



Going further

Updated on: 20/11/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!